Servo · Hitec
Hitec HS-225BB
Voltaj4.8V ~ 6.0V
Motor3 Pole Metal Brush Ferrite
DişliNylon
Ağırlık27 g
Ölçü32.4 × 16.8 × 31.0 mm
| Voltaj | Tork kg·cm | Hız sn/60° |
|---|---|---|
| 4.8 V | 3,9 | 0,14 |
| 6.0 V | 4,8 | 0,11 |
Üretici özellikleri
| Operating Voltage Range (Volts DC) | 4.8V ~ 6.0V |
|---|---|
| Speed (Second @ 60°) | 0.14 ~ 0.11 |
| Maximum Torque Range oz. / in. | 54 ~ 67 |
| Maximum Torque Range kg. / cm. | 3.9 ~ 4.8 |
| Current Draw at Idle | 8 mA |
| No Load Operating Current Draw | 300 mA |
| Stall Current Draw | 1,200 mA |
| Dead Band Width | 8 µs |
| Dimensions (Inches) | 1.27 x 0.66 x 1.22 |
| Dimensions (Metric) | 32.4 x 16.8 x 31.0 |
| Weight (Ounces) | 0.95 |
| Weight (Gram) | 27.0 |
| Circuit Type | HT7003 Analog SMT |
| Motor Type | 3 Pole Metal Brush Ferrite |
| Gear Material | Nylon |
| Bearing Type | Top Ball Bearing |
| Output Shaft (type / Ømm) | Standard 24 |
| Case Material | Plastic |
| Dust / Water Resistance | N / A |
| Connector Gauge (AWG) / Strand Count | 25 / 40 |
Kaynak: hitecrcd.com · 1 Kasım 2026