Servo · Hitec
Hitec HS-5055MG
Voltaj4.8V ~ 6.0V
Motor3 Pole Metal Brush Ferrite
DişliMetal
Ağırlık9,5 g
Ölçü22.8 × 11.6 × 24.0 mm
| Voltaj | Tork kg·cm | Hız sn/60° |
|---|---|---|
| 4.8 V | 1,3 | 0,2 |
| 6.0 V | 1,6 | 0,17 |
Üretici özellikleri
| Operating Voltage Range (Volts DC) | 4.8V ~ 6.0V |
|---|---|
| Speed (Second @ 60°) | 0.20 ~ 0.17 |
| Maximum Torque Range oz. / in. | 18 ~ 22 |
| Maximum Torque Range kg. / cm. | 1.3 ~ 1.6 |
| Current Draw at Idle | 8 mA |
| No Load Operating Current Draw | 120 mA |
| Stall Current Draw | 700 mA |
| Dead Band Width | 6 µs |
| Dimensions (Inches) | 0.89 x 0.45 x 0.94 |
| Dimensions (Metric) | 22.8 x 11.6 x 24.0 |
| Weight (Ounces) | 0.33 |
| Weight (Gram) | 9.5 |
| Circuit Type | G1 Programable Digital |
| Motor Type | 3 Pole Metal Brush Ferrite |
| Gear Material | Metal |
| Bearing Type | None |
| Output Shaft (type / Ømm) | Feather 15 |
| Case Material | Plastic |
| Dust / Water Resistance | N / A |
| Connector Gauge (AWG) / Strand Count | 28 / 20 |
Kaynak: hitecrcd.com · 1 Kasım 2026