Servo · Hitec
Hitec HS-646WP
Voltaj6.0V ~ 7.4V
Motor3 Pole Metal Brush Ferrite
DişliMetal
Ağırlık60 g
Ölçü41.8 × 21.0 × 40.0 mm
| Voltaj | Tork kg·cm | Hız sn/60° |
|---|---|---|
| 6.0 V | 9,6 | 0,2 |
| 7.4 V | 11,6 | 0,17 |
Üretici özellikleri
| Operating Voltage Range (Volts DC) | 6.0V ~ 7.4V |
|---|---|
| Speed (Second @ 60°) | 0.20 ~ 0.17 |
| Maximum Torque Range oz. / in. | 133 ~ 161 |
| Maximum Torque Range kg. / cm. | 9.6 ~ 11.6 |
| Current Draw at Idle | 8 mA |
| No Load Operating Current Draw | 600 mA |
| Stall Current Draw | 2,200 mA |
| Dead Band Width | 4 µs |
| Dimensions (Inches) | 1.65 x 0.83 x 1.57 |
| Dimensions (Metric) | 41.8 x 21.0 x 40.0 |
| Weight (Ounces) | 2.12 |
| Weight (Gram) | 60.0 |
| Circuit Type | HT7003 WP Analog |
| Motor Type | 3 Pole Metal Brush Ferrite |
| Gear Material | Metal |
| Bearing Type | Dual Ball Bearing |
| Output Shaft (type / Ømm) | Standard 24 |
| Case Material | Plastic |
| Dust / Water Resistance | IP 67 |
| Connector Gauge (AWG) / Strand Count | 22 / 60 |
Kaynak: hitecrcd.com · 1 Kasım 2026