Servo · Hitec
Hitec HS-65HB
Voltaj4.8V ~ 6.0V
Motor3 Pole Metal Brush Neodymium
DişliKarbonite
Ağırlık11,2 g
Ölçü23.6 × 11.6 × 24.0 mm
| Voltaj | Tork kg·cm | Hız sn/60° |
|---|---|---|
| 4.8 V | 1,6 | 0,16 |
| 6.0 V | 1,9 | 0,13 |
Üretici özellikleri
| Operating Voltage Range (Volts DC) | 4.8V ~ 6.0V |
|---|---|
| Speed (Second @ 60°) | 0.16 ~ 0.13 |
| Maximum Torque Range oz. / in. | 22 ~ 26 |
| Maximum Torque Range kg. / cm. | 1.6 ~ 1.9 |
| Current Draw at Idle | 7.7 mA |
| No Load Operating Current Draw | 220 mA |
| Stall Current Draw | 1,200 mA |
| Dead Band Width | 5 µs |
| Dimensions (Inches) | 0.92 x 0.45 x 0.94 |
| Dimensions (Metric) | 23.6 x 11.6 x 24.0 |
| Weight (Ounces) | 0.39 |
| Weight (Gram) | 11.2 |
| Circuit Type | HT7003 Analog SMT |
| Motor Type | 3 Pole Metal Brush Neodymium |
| Gear Material | Karbonite |
| Bearing Type | Top Ball Bearing |
| Output Shaft (type / Ømm) | Feather 15 / 8 |
| Case Material | Plastic |
| Dust / Water Resistance | N / A |
| Connector Gauge (AWG) / Strand Count | 28 / 20 |
Kaynak: hitecrcd.com · 1 Kasım 2026