Servo · Hitec
Hitec HS-65MG
Voltaj4.8V ~ 6.0V
Motor3 Pole Metal Brush Neodymium
DişliMetal
Ağırlık11,9 g
Ölçü23.6 × 11.6 × 24.0 mm
| Voltaj | Tork kg·cm | Hız sn/60° |
|---|---|---|
| 4.8 V | 1,8 | 0,14 |
| 6.0 V | 2,2 | 0,11 |
Üretici özellikleri
| Operating Voltage Range (Volts DC) | 4.8V ~ 6.0V |
|---|---|
| Speed (Second @ 60°) | 0.14 ~ 0.11 Maximum Torque Range oz. - in. 25 ~ 31 |
| Maximum Torque Range kg. / cm. | 1.8 ~ 2.2 |
| Current Draw at Idle | 8 mA |
| No Load Operating Current Draw | 220 mA |
| Stall Current Draw | 1200 mA |
| Dead Band Width | 5 µs |
| Dimensions (Inches) | 0.92 x 0.45 x 0.94 |
| Dimensions (Metric) | 23.6 x 11.6 x 24.0 |
| Weight (Ounces) | 0.42 |
| Weight (Gram) | 11.9 |
| Circuit Type | HT7003 Analog SMT |
| Motor Type | 3 Pole Metal Brush Neodymium |
| Gear Material | Metal |
| Bearing Type | Top Ball Bearing |
| Output Shaft (type / Ømm) | Micro 25 |
| Case Material | Plastic |
| Dust / Water Resistance | N / A |
| Connector Gauge (AWG) / Strand Count | 28 / 20 |
Kaynak: hitecrcd.com · 1 Kasım 2026