Servo · Hitec
Hitec HS-70MG
Voltaj4.8V ~ 6.0V
Motor3 Pole Metal Brush Neodymium
DişliMetal
Ağırlık14,2 g
Ölçü23.6 × 11.6 × 28.1 mm
| Voltaj | Tork kg·cm | Hız sn/60° |
|---|---|---|
| 4.8 V | 2,4 | 0,17 |
| 6.0 V | 3 | 0,14 |
Üretici özellikleri
| Operating Voltage Range (Volts DC) | 4.8V ~ 6.0V |
|---|---|
| Speed (Second @ 60°) | 0.17 ~ 0.14 |
| Maximum Torque Range oz. / in. | 33 ~ 42 |
| Maximum Torque Range kg. / cm. | 2.4 ~ 3.0 |
| Current Draw at Idle | 8 mA |
| No Load Operating Current Draw | 160 mA |
| Stall Current Draw | 1,250 mA |
| Dead Band Width | 5 µs |
| Dimensions (Inches) | 0.92 x 0.45 x 1.14 |
| Dimensions (Metric) | 23.6 x 11.6 x 28.1 |
| Weight (Ounces) | 0.50 |
| Weight (Gram) | 14.2 |
| Circuit Type | HT7003 Analog SMT |
| Motor Type | 3 Pole Metal Brush Neodymium |
| Gear Material | Metal |
| Bearing Type | Top Ball Bearing |
| Output Shaft (type / Ømm) | Micro 25 |
| Case Material | Plastic |
| Dust / Water Resistance | N / A |
| Connector Gauge (AWG) / Strand Count | 28 / 20 |
Kaynak: hitecrcd.com · 1 Kasım 2026